tesa.com에 대한 쿠키 설정
당사는 쿠키 및 기타 기술(타사 서비스 포함)을 사용하여 웹 사이트 기능을 제공하며, 사용량을 이해하고, 제품을 최적화하며 개별화된 서비스 제품 및 광고를 제공합니다. 더 자세한 내용은 언제든지 쿠키 설정을 변경할 수 있는 당사의 개인정보처리방침 및 당사의 쿠키정책을 확인하세요.
0.8 mm double-sided PE foam tape for mounting automotive exterior trims and emblems
제품 기능
High ultimate adhesive strength
Excellent temperature resistance
Excellent converting properties, especially for filigree designs
모든 제품 기능Product description
tesa® 62854 is a double-sided adhesive tape consisting of a conformable black PE foam backing and a pure acrylic adhesive. With a thickness of 0.8 mm, it is suitable for mounting small trims and nameplates, especially those with filigree designs.
The black color allows for an almost invisible bond line.
The pure acrylic adhesive features a very good initial and high ultimate adhesion performance on MSE plastics like ABS, chromed ABS, PC, and PMMA, as well as on MSE clear coats combined with an excellent temperature resistance. The impressive cold shock performance results from the damping properties of the PE foam backing even at temperatures below -40°C.
Also available in 0.5 mm, 0.9 mm, and 1.2 mm formats.
제품 세부 사항 및 사양
제품 기능
High ultimate adhesive strength
Excellent temperature resistance
Excellent converting properties, especially for filigree designs
Conformable foam backing to compensate for design tolerances or uneven surfaces
The tape combines high cohesive strength with a comparatively low density contributing positively to a low weight design.
Due to the high conformability, the tape ensures a good wet out and secure bonding even on uneven surfaces and compensates for design tolerances.
The PE foam backing also provides non-sticky edges resulting in excellent converting properties, e.g. for die cutting.
Application Fields
tesa® 62854 is suitable for mounting a wide range of small exterior trims and parts. To ensure the highest performance possible, our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation.
Example applications are:
Emblems
Nameplates
Lettering like single letters for classification of car models or engine data
Locator pin on windscreens
Product Construction
Type of adhesive
type: pure acrylic
기재 소재
PE 폼
총두께
0.8 µm
컬러
검정
Product Construction
Type of adhesive
type: pure acrylic
기재 소재
PE 폼
총두께
0.8 µm
컬러
검정
Properties / Performance Values
연신률
350 %
인장강도
12 N/cm
단기간 온도저항
100 °C
정적 전단응력 (70°C)
very good
장기간 온도저항
90 °C
정적 전단응력 (40°C)
very good
Properties / Performance Values
연신률
350 %
인장강도
12 N/cm
단기간 온도저항
100 °C
정적 전단응력 (70°C)
very good
장기간 온도저항
90 °C
정적 전단응력 (40°C)
very good
Adhesion to Values
ABS점착력 (초기)
8 N/cm
ABS점착력 (14일 경과)
17 N/cm
Steel점착력 (초기)
13 N/cm
Steel점착력 (14일 경과)
17 N/cm
Adhesion to Values
ABS점착력 (초기)
8 N/cm
ABS점착력 (14일 경과)
17 N/cm
Steel점착력 (초기)
13 N/cm
Steel점착력 (14일 경과)
17 N/cm
Additional Info
Liner variants:
PV0 brown glassine paper (71 µm)
PV14 white PE coated paper liner (120µm)
Peel Adhesion:
- after 14 days: foam splitting on Steel, ABS
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.