tesa® 60650
제품 세부 사항 및 사양
Product Construction
| 기재 소재 | 알루미늄호일 |
|---|---|
| 이형지 종류 | 없음 |
| 점착제 종류 | 아크릴 |
| 총두께 | 90 µm |
Product Construction
| 기재 소재 | 알루미늄호일 |
|---|---|
| 이형지 종류 | 없음 |
| 점착제 종류 | 아크릴 |
| 총두께 | 90 µm |
Properties / Performance Values
| 연신률 | 6 % |
|---|---|
| 인장강도 | 40 N/cm |
| Operation temperature up to | 160 °C |
| 손으로 찢을 수 있는 | very good |
| 내습성 | very good |
| Operation temperature from | -40 °C |
| 기재 외관 (시각적) | reflective |
| 내마모성 | good |
| 최저 내열도 | -40 °C |
| 다이컷팅에 적합 | 아니오 |
| 떼어내기 쉬운 | 아니오 |
Properties / Performance Values
| 연신률 | 6 % |
|---|---|
| 인장강도 | 40 N/cm |
| Operation temperature up to | 160 °C |
| 손으로 찢을 수 있는 | very good |
| 내습성 | very good |
| Operation temperature from | -40 °C |
| 기재 외관 (시각적) | reflective |
| 내마모성 | good |
| 최저 내열도 | -40 °C |
| 다이컷팅에 적합 | 아니오 |
| 떼어내기 쉬운 | 아니오 |
Adhesion to Values
| 기재 점착력 | 0.5 N/cm |
|---|---|
| 유리점착력 (초기) | 9 N/cm |
| PE점착력 (초기) | 4.5 N/cm |
| PVC점착력 (초기) | 6 N/cm |
| Steel점착력 | 9 N/cm |
Adhesion to Values
| 기재 점착력 | 0.5 N/cm |
|---|---|
| 유리점착력 (초기) | 9 N/cm |
| PE점착력 (초기) | 4.5 N/cm |
| PVC점착력 (초기) | 6 N/cm |
| Steel점착력 | 9 N/cm |
Certificates
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
이 제품에 대한 자세한 기술 세부 정보와 정보를 얻으려면 아래 파일을 다운로드하십시오.