tesa® 4582 High Adhesion
부직포 단면 테이프
제품 기능
- The high adhesion level achieves a perfect hold on various production circumstances
- The good permeability for air and other gases allows the foam to fill the entire body resulting in an optimal thermal insulation
- The permeability is homogeneously spread for efficient processes and constant foaming results
Product description
tesa® 4582 제품은 환기(통풍구) 어플리케이션용 단면 테이프입니다. 본 제품은 백킹을 부분적으로 덮기 위해 특정한 패턴으로 코팅된 부직포를 기반으로 한다. 점착제의 균일한 도포로 지속적인 환기 성능을 보장합니다.
제품 세부 사항 및 사양
제품 기능
- The high adhesion level achieves a perfect hold on various production circumstances
- The good permeability for air and other gases allows the foam to fill the entire body resulting in an optimal thermal insulation
- The permeability is homogeneously spread for efficient processes and constant foaming results
- Works excellent as a barrier against foams to decrease foam leakage and cleaning effort
- Unwinds gently to avoid curling which makes the handling easier in order to reduce process time
- Comes without a liner to reduce the general waste in production sites
- Easily torn by hand for an increased working efficiency
- Is conformable to shaped structures
- Allows an exchange of moisture and other gases
- The specific coating structure of tesa® 4582 achieves a very high adhesion level while maintaining good air permeability.
Application Fields
The venting tape is used to cover holes during foaming processes in different industries
- Designed for appliances where the foam is used to insulate fridges and freezers, as well as to stabilize the body
- In production of special vehicles such as refrigerator trucks
Product Construction
| 기재 소재 | 부직포 |
|---|---|
| 점착제 종류 | 아크릴 |
| 총두께 | 190 µm |
| 컬러 | 흰색 |
Product Construction
| 기재 소재 | 부직포 |
|---|---|
| 점착제 종류 | 아크릴 |
| 총두께 | 190 µm |
| 컬러 | 흰색 |
Properties / Performance Values
| 연신률 | 8 % |
|---|---|
| 인장강도 | 35 N/cm |
| 낮은 풀림강도 | good |
| 노후성 (UV) | very good |
| 공기 투과성 | 21 cm³/cm²xs |
| 손으로 찢을 수 있는 | good |
| 무용제 | 네 |
| Operation temperature up to | 160 °C |
Properties / Performance Values
| 연신률 | 8 % |
|---|---|
| 인장강도 | 35 N/cm |
| 낮은 풀림강도 | good |
| 노후성 (UV) | very good |
| 공기 투과성 | 21 cm³/cm²xs |
| 손으로 찢을 수 있는 | good |
| 무용제 | 네 |
| Operation temperature up to | 160 °C |
Adhesion to Values
| ABS점착력 (초기) | 4 N/cm |
|---|---|
| PE점착력 (초기) | 1 N/cm |
| PS점착력 (초기) | 3.7 N/cm |
| Steel점착력 | 3 N/cm |
Adhesion to Values
| ABS점착력 (초기) | 4 N/cm |
|---|---|
| PE점착력 (초기) | 1 N/cm |
| PS점착력 (초기) | 3.7 N/cm |
| Steel점착력 | 3 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
이 제품에 대한 자세한 기술 세부 정보와 정보를 얻으려면 아래 파일을 다운로드하십시오.
