tesa® 4302
고성능 종이 마스킹 테이프 (160°C)
제품 기능
- 천연 고무 점착제는 페인트, 금속, 유리, 고무 및 플라스틱과 같은 다양한 표면에 높은 밀착력을 제공.
- 코너링이 양호한 우수한 순응성을 지닌 매끄러운 터치 페이퍼 백킹.
- 냉각 후에도 잔여물이나 찢어짐 없이 제거할 수 있음.
Product description
tesa® 4302는 크레이프지 마스킹 테이프로서 특히 고도의 성능이 필요한 자동차 페인트(수성 및 유성 페인트 도장), 오븐건조 공정에 적합합니다.
기재에 완벽하게 점착되며 도장면에도 벗겨짐 없이 점착 가능합니다.
tesa® 4302는 고무, 유리, 페인트면에서 뗄 때 찢어지지 않고 잔사 없이 제거가 가능합니다. 또한 고열 공정 이후 저온에서도 잘 제거됩니다.
미세한 주름이 있어 모서리 부분에서의 사용도 적합합니다.
제품 세부 사항 및 사양
제품 기능
- 천연 고무 점착제는 페인트, 금속, 유리, 고무 및 플라스틱과 같은 다양한 표면에 높은 밀착력을 제공.
- 코너링이 양호한 우수한 순응성을 지닌 매끄러운 터치 페이퍼 백킹.
- 냉각 후에도 잔여물이나 찢어짐 없이 제거할 수 있음.
Application Fields
최대 160°C/1시간까지 이어지는 오븐 건조의 까다로운 자동차 도장 작업의 마스킹 애플리케이션에 적합.
Product Construction
기재 소재 | 약간 크레이프화된 종이 |
---|---|
점착제 종류 | 천연고무 |
총두께 | 170 µm |
Product Construction
기재 소재 | 약간 크레이프화된 종이 |
---|---|
점착제 종류 | 천연고무 |
총두께 | 170 µm |
Properties / Performance Values
연신률 | 10 % |
---|---|
인장강도 | 46 N/cm |
내열성 (60분) | 160 °C |
떼어내기 쉬운 | 네 |
손으로 찢을 수 있는 | very good |
Properties / Performance Values
연신률 | 10 % |
---|---|
인장강도 | 46 N/cm |
내열성 (60분) | 160 °C |
떼어내기 쉬운 | 네 |
손으로 찢을 수 있는 | very good |
Adhesion to Values
Steel점착력 | 4 N/cm |
---|
Adhesion to Values
Steel점착력 | 4 N/cm |
---|
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
이 제품에 대한 자세한 기술 세부 정보와 정보를 얻으려면 아래 파일을 다운로드하십시오.
