tesa® PRO 66792 Mounting Ultra Strong
Product details and specifications
Product Construction
Backing material | PE foam |
---|---|
Color | white |
Color of liner | white/red logo |
Total thickness | 1150 µm |
Type of adhesive | synthetic rubber |
Product Construction
Backing material | PE foam |
---|---|
Color | white |
Color of liner | white/red logo |
Total thickness | 1150 µm |
Type of adhesive | synthetic rubber |
Properties / Performance Values
Tack | very good |
---|---|
Temperature resistance short term | 40 °C |
Temperature resistance long term | 40 °C |
Chemical resistance | good |
Ageing resistance (UV) | medium |
Removability after 14 days (85°C, 95% r.h.) | medium |
Humidity resistance | good |
Softener resistance | good |
Properties / Performance Values
Tack | very good |
---|---|
Temperature resistance short term | 40 °C |
Temperature resistance long term | 40 °C |
Chemical resistance | good |
Ageing resistance (UV) | medium |
Removability after 14 days (85°C, 95% r.h.) | medium |
Humidity resistance | good |
Softener resistance | good |
Adhesion to Values
Adhesion to Aluminium (initial) | 15 N/cm |
---|---|
Adhesion to Aluminium (covered side, initial) | 11 N/cm |
Adhesion to PC (initial) | 11 N/cm |
Adhesion to PC (covered side, initial) | 11 N/cm |
Adhesion to PE (initial) | 10 N/cm |
Adhesion to PE (covered side, initial) | 10 N/cm |
Adhesion to PET (initial) | 15 N/cm |
Adhesion to PET (covered side, initial) | 13 N/cm |
Adhesion to PP (initial) | 10 N/cm |
Adhesion to PP (covered side, initial) | 10 N/cm |
Adhesion to PS (initial) | 10 N/cm |
Adhesion to PS (covered side, initial) | 10 N/cm |
Adhesion to PVC (initial) | 15 N/cm |
Adhesion to PVC (covered side, initial) | 13 N/cm |
Adhesion to Steel (initial) | 15 N/cm |
Adhesion to Steel (covered side, initial) | 11 N/cm |
Adhesion to Values
Adhesion to Aluminium (initial) | 15 N/cm |
---|---|
Adhesion to Aluminium (covered side, initial) | 11 N/cm |
Adhesion to PC (initial) | 11 N/cm |
Adhesion to PC (covered side, initial) | 11 N/cm |
Adhesion to PE (initial) | 10 N/cm |
Adhesion to PE (covered side, initial) | 10 N/cm |
Adhesion to PET (initial) | 15 N/cm |
Adhesion to PET (covered side, initial) | 13 N/cm |
Adhesion to PP (initial) | 10 N/cm |
Adhesion to PP (covered side, initial) | 10 N/cm |
Adhesion to PS (initial) | 10 N/cm |
Adhesion to PS (covered side, initial) | 10 N/cm |
Adhesion to PVC (initial) | 15 N/cm |
Adhesion to PVC (covered side, initial) | 13 N/cm |
Adhesion to Steel (initial) | 15 N/cm |
Adhesion to Steel (covered side, initial) | 11 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
