tesa® 4318 PV2

High performance paper masking tape up to 160 °C


Product description

tesa® 4318 PV2 is a finely crêped, flexible paper masking tape, especially suitable for the high requirements of painting (water or solvent based paints) followed by oven-drying.


Product details and specifications

Backing material slightly-creped paper
Total thickness 170 µm
Type of adhesive natural rubber
Elongation at break 12 %
Tensile strength 47 N/cm
Easy to remove yes
Hand tearability very good
Temperature resistance (60 min) 160 °C
Adhesion to steel 4 N/cm
Paints and filler systems adhere very well to the backing avoiding any kind of flaking.

tesa® 4318 PV2 can be removed from rubber, glass and paint without leaving adhesive residues.
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads

Download the files below for more technical details and information on this product.

Get in contact with us!

Contact us

Thank you for your message.

We will contact you as soon as possible.

Something went wrong. Please try again later.

Product comparison

Name of product tesa® 4318 PV2 tesa® 4338 PV1 tesa® 4316 PV3 tesa® 50620 tesa® 4331 tesa® 61126 tesa® 4428 tesa® 50650 Conformable tesa® 51408 tesa® 51407 tesa® 50600 Standard
Total thickness
170 µm
145 µm
140 µm
70 µm
110 µm
125 µm
60 µm
55 µm
65 µm
62 µm
80 µm
Type of adhesive
natural rubber
natural rubber
natural rubber
silicone
silicone
silicone
silicone
silicone
silicone
silicone
silicone
Backing material
slightly-creped paper
slightly-creped paper
slightly-creped paper
PET
PET / non-woven
PETP
Polyimide
PETP
Polyimide
Polyimide
PET
Adhesion to steel
4 N/cm
4 N/cm
3.4 N/cm
3.6 N/cm
4 N/cm
4.3 N/cm
2.5 N/cm
3.3 N/cm
2.8 N/cm
2.5 N/cm
4 N/cm
Last updated on 15 Jun 2026