tesa® 4173 PV2
Soft PVC wire harness tape for high temperature areas (105°C)
Product description
tesa 4173-PV2 is a plasticised PVC tape optimised for wire harness bundling in areas where the temperature may reach 105°C. Its strong film backing allows for open as well as over-lapped wrapping styles. Its water based acrylic adhesive supports low outgassing of volatile organic compounds.
Features
- cadmium and lead free
- solvent-free
- compatible with PVC-free wire insulation
- flexible
- ozone resistant
- abrasion resistant
- resistant to ageing and weathering
- unwinds evenly
Product details and specifications
Application Fields
Wire Harnessing
Product Construction
| Backing material | PVC film |
|---|---|
| Total thickness | 126 µm |
| Type of adhesive | acrylic |
Product Construction
| Backing material | PVC film |
|---|---|
| Total thickness | 126 µm |
| Type of adhesive | acrylic |
Properties / Performance Values
| Elongation at break | 250 % |
|---|---|
| Tensile strength | 30 N/cm |
| Temperature resistance min. | -25 °C |
| Dielectric breakdown voltage | 7000 V |
| Abrasion resistance (5mm mandrel, LV312) | Class A |
| Abrasion resistance (10mm mandrel, LV312) | Class A |
| Noise damping (LV312) | Class A |
| Temperature resistance max. | 105 °C |
Properties / Performance Values
| Elongation at break | 250 % |
|---|---|
| Tensile strength | 30 N/cm |
| Temperature resistance min. | -25 °C |
| Dielectric breakdown voltage | 7000 V |
| Abrasion resistance (5mm mandrel, LV312) | Class A |
| Abrasion resistance (10mm mandrel, LV312) | Class A |
| Noise damping (LV312) | Class A |
| Temperature resistance max. | 105 °C |
Adhesion to Values
| Adhesion to steel | 1.8 N/cm |
|---|
Adhesion to Values
| Adhesion to steel | 1.8 N/cm |
|---|
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
