tesa® 6957 Laser-Label

High heat resistant, high-speed markable and fraud-resistant



Product description

tesa® 6957 is a double layer, brittle acrylic film with watermark. Customized and fraud-resistant information, such as company logo, is permanently embedded in the backing. Marking and cutting are achieved by laser in one step, which makes it possible to realize any desirable label variation and format using only one material. The backing is highly resistant against chemicals, abrasion, temperature and aging.

The adhesive system consists of a resin modified acrylic suitable even for low energy surfaces. The adhesive will leave an UV-detectable trace (“UV-Footprint”) on most surfaces as required by GB 25978 (P.R.C.) and NHTSA §541.5 (USA).

The use of a high-speed laser enables a considerably quick marking up to 4000mm/ sec.

Available in: black

Main applications

This high performance product is used as a tamper evident identification label over the entire lifetime of a product and also as a data carrier system for intelligent in-process steering.
The product is specially designed to fullfil the requirements of F-Type labels (engine and transmission) as defined by GB 25978 (P.R.C.)

Technical properties

Backing material

acrylic

Tamper Evidence

yes

Peel off force from liner

0.5-10 cN/cm

Type of adhesive

acrylic

Adhesion >

1.8 N/cm

Type of liner

coated paper

Weight of liner

120 g/m²

Rating properties

Printability

++

Temperature resistance short term

250 °C

Temperature resistance long term

150 °C

Ageing resistance (UV)

++

Frost resistance

-40 °C

Humidity resistance

++

Resistance to chemicals

++

Suitable Laser

CO2, Nd:YAG, Yb:YAG

Storage conditions

23°C, 50% RH, stored in original box

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads

Related products