tesa_CIMT_pr_001

Product information

tesa® 66007 Ultra Low VOC

75µm reinforced water-based acrylic adhesive layer with PET scrim for mounting applications in automotive interiors



Product description

tesa®  66007 is a conformable, water-based acrylic adhesive tape with a thickness of 75 µm, reinforced by a PET scrim. This tape has especially been developed for all kinds of standard lamination and mounting applications. Due to its low VOC property it is particularly designed to meet automotive interior requirements.
tesa®  66007 is suitable for laminating all kinds of foam, fleece, and felt substrates and mounting light interior components.

This product is also available in 130µm and 220µm (66013, 66022).

Main features:

  • Highly conformable to follow difficult 3-D shapes
  • Low VOC (acc. GB 27630) – no critical substances detectable
  • Reinforcement supports converting efficiency
  • Very low total VOC values
  • High initial tack and peel adhesion
  • Very good initial adhesion to a wide variety of interior substrates
  • Secure mounting even to nonpolar plastics (PP) and composites (recycled materials)

Main applications

tesa®  66007 is suitable for various types of mounting and lamination applications. To ensure the highest performance possible, our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation.

Example applications are:

  • Mounting of light interior trims (plastics, LSE surfaces)
  • FPC (flexible printed circuits) mounting
  • Lamination of insulation materials
  • Laminates for NVH (noise, vibration, and harshness) and BSR (buzz, squeak,
  • and rattle) prevention
  • Lamination of decorative fabrics
  • Lamination of foam for HVAC (heating, ventilation, and air conditioning) seals
  • Mounting of flooring systems
tesa_CIMT_pr_001
tesa_66007_pr_001_fullsize
tesa_CIMT_pr_001
tesa_66007_pr_001_fullsize

Technical properties

Backing material

none

Color

transparent

Total thickness

75 µm

Thickness of tape

75 µm

Type of adhesive

water-based acrylic

Type of liner

glassine

Colour of liner

brown/blue logo

Temperature resistance from

-40 °C

Temperature resistance up to

170 °C

Adhesion properties

Adhesion to ABS (after 3 days)

12.2 N/cm

Adhesion to ABS (initial)

11 N/cm

Adhesion to PC (after 3 days)

11.4 N/cm

Adhesion to PC (initial)

11.2 N/cm

Adhesion to PE (after 3 days)

4.5 N/cm

Adhesion to PE (initial)

4 N/cm

Adhesion to PET (after 3 days)

11 N/cm

Adhesion to PET (initial)

10.1 N/cm

Adhesion to PP (after 3 days)

11 N/cm

Adhesion to PP (initial)

4.5 N/cm

Adhesion to PS (after 3 days)

10.8 N/cm

Adhesion to PS (initial)

9.4 N/cm

Adhesion to PVC (after 3 days)

11.7 N/cm

Adhesion to PVC (initial)

8.8 N/cm

Adhesion to Steel (after 3 days)

12.3 N/cm

Adhesion to Steel (initial)

9.7 N/cm

Rating properties

Suitable for die cutting

yes

Suitable for rough surfaces

++

Tack

++

Storage conditions

23°C, 50% RH, stored in original box

Conformability

++

Low VOC

++

Fogging

++

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads

Related products