tesa_66007_pr_001_fullsize
Product information

tesa® 66007 low VOC



Product description

tesa® 66007 is a conformable transparent adhesive layer of water based acrylic reinforced with a PET scrim mesh.

Features:
1 very low total VOC values and no critical substances detectable
1 high initial tack and peel adhesion
1 high conformable design following 3D shapes
1 provides excellent conformability and stability
1 provides excellent initial adhesion to a wide variety of interior substrates
1 suitable for the bonding to nonpolar plastics, foams, felts and fabrics
1 the scrim provides a reinforcement of flexible substrates for improving converting efficiency and handling

Main applications

Mounting of plastics as well LSE plastics

1 with difficult wet-out
1 permanent low load

Lamination or mounting of critical, soft, light and smooth surfaces / sheets
1 immediate and secure bending around the edge
tesa_66007_pr_001_fullsize
tesa_CIMT_pr_001

tesa_66007_pr_001_fullsize

tesa_CIMT_pr_001

Technical properties

Backing material

none

Color

transparent

Total thickness

75 µm

Thickness of tape

75 µm

Type of adhesive

water-based acrylic

Type of liner

glassine

Colour of liner

brown/blue logo

Temperature resistance from

-40 °C

Temperature resistance up to

170 °C

Adhesion properties

Adhesion to ABS (after 3 days)

12.2 N/cm

Adhesion to ABS (initial)

11 N/cm

Adhesion to PC (after 3 days)

11.4 N/cm

Adhesion to PC (initial)

11.2 N/cm

Adhesion to PE (after 3 days)

4.5 N/cm

Adhesion to PE (initial)

4 N/cm

Adhesion to PET (after 3 days)

11 N/cm

Adhesion to PET (initial)

10.1 N/cm

Adhesion to PP (after 3 days)

11 N/cm

Adhesion to PP (initial)

4.5 N/cm

Adhesion to PS (after 3 days)

10.8 N/cm

Adhesion to PS (initial)

9.4 N/cm

Adhesion to PVC (after 3 days)

11.7 N/cm

Adhesion to PVC (initial)

8.8 N/cm

Adhesion to Steel (after 3 days)

12.3 N/cm

Adhesion to Steel (initial)

9.7 N/cm

Rating properties

Suitable for die cutting

yes

Suitable for rough surfaces

++

Tack

++

Storage conditions

23°C, 50% RH, stored in original box

Conformability

++

Low VOC

++

Fogging

++

Additional Info

Is designed to fulfill the low VOC (Volatile Organic Compounds) automotive requirements set forth by the Japanese Ministry of Health, Labor and Welfare (MHLW) and the Japanese Automobile Manufacturers Association (JAMA) limit of concentrations of 13 toxic chemistries. Acc. Toyota TSK0508G our assortment is conform Japanese automotive requirements

Adhesion vaules to:
PVC
PP
ABS
PC
PET
PS
PE
Are not part of the product specification


PV20 brown glassine liner / blue tesa logo
other liner version possible - on request

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads
Related products

Related applications