Product information

tesa® 62510

Product description

tesa® 62510 is a double sided PE foam tape for mounting applications. It consists of a highly conformable PE-foam backing and a tackified acrylic adhesive.

Product benefits:
1 High ultimate adhesion level for a reliable bonding performance
  • Fully outdoor suitable: UV, water and ageing resistant
  • Conformable PE foam core with high inner strength
  • Suitable for automatic and manual module assembly
  • Easy solar module assembly due to a high foam compression rate

Main applications

General mounting applications
Mounting of trims and profiles
Solar module frames



Technical properties

Backing material

PE foam



Total thickness

1000 µm

Type of adhesive

tackified acrylic

Elongation at break

180 %

Tensile strength

10 N/cm

Adhesion properties

Adhesion to ABS (after 14 days)

13.5 N/cm

Adhesion to ABS (initial)

8 N/cm

Adhesion to Aluminium (after 14 days)

13.5 N/cm

Adhesion to Aluminium (initial)

8 N/cm

Adhesion to PC (after 14 days)

13.5 N/cm

Adhesion to PC (initial)

8 N/cm

Adhesion to PE (after 14 days)

0.9 N/cm

Adhesion to PE (initial)

0.9 N/cm

Adhesion to PET (after 14 days)

13.5 N/cm

Adhesion to PET (initial)

6 N/cm

Adhesion to PP (after 14 days)

1.2 N/cm

Adhesion to PP (initial)

1.2 N/cm

Adhesion to PS (after 14 days)

8 N/cm

Adhesion to PS (initial)

8 N/cm

Adhesion to PVC (after 14 days)

13.5 N/cm

Adhesion to PVC (initial)

13.5 N/cm

Adhesion to Steel (after 14 days)

13.5 N/cm

Adhesion to Steel (initial)

13.5 N/cm

Rating properties

Temperature resistance short term

80 °C

Temperature resistance long term

80 °C



Ageing resistance (UV)


Humidity resistance


Softener resistance


Static shear resistance at 23°C


Static shear resistance at 40°C


Static shear resistance at 70°C


Additional Info

Liner variants:
PV0 brown glassine paper (70µm)
PV13 transparent PET (50µm)
PV15 blue PE (100µm)

Peel Adhesion:
-immediately: foam splitting on steel
-after 14 days: foam splitting on steel, ABS, Aluminum, PC, PET, PS, PVC

tesa® 62510 is recognized by UL as photovoltaic polymeric material (QIHE2).

tesa® 62510 has been tested by TÜV Rheinland, Germany. The test confirms the longterm adhesion performance after IEC 61215 climate tests and a 85°C temperature resistance.

The temperature resistance (short/long) of tesa® 62510 has been approved according to tesa test method under static load.

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products

Related applications