tesa_adhesive-promoter_60151_ps_001
Product information

tesa® 60151



Product description

tesa® Adhesion Promoter is used to improve the adhesion of tesa® ACXplus tapes to glass.

Main applications

Only for glass. Not recommended for laquered and foil-coated glass.
Used to enhance the bonding strength and to avoid humidity on the glass.
tesa_adhesive-promoter_60151_ps_001

tesa_adhesive-promoter_60151_ps_001

Technical properties

Color

transparent

Consistency

liquid

Solids

0.5 %

Viscosity

2.5 mPa s

Density

0.81 g/cm³

Spreading rate ca.

15 m²/l

Additional Info

The bonding surface should be free of dust, grease, oil, moisture and other contaminants before using tesa® Adhesion Promoter 60151 for glass.
Clean the substrate with a lint free cloth and appropriate solvents, such as Ethanol or Isopropanol.
Then apply tesa® Adhesion Promoter 60151 thinly to the bonding surface, making sure that the entire surface is coated. The Adhesion Promoter can be applied with a lint free cloth or brush, application pen or felt applicator. For best performance use a second/clean lint free cloth to remove excess of promoter.
Wait 30 seconds to 5 minutes to give the solvents time to evaporate.
Keep the prepared surface free from contaminants prior to applying tesa® ACXplus tape.
Open time for bonding are around 5 to 15 minutes.

Shelf life are 12 month when stored in the original container at room temperature.

For all further information kindly refer to the respective material safety data sheet (MSDS).

http://www.tesa.com/company/safety/msds

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads
Related products