tesa® ACXplus 70200 Certified Durability

2,00 µm double-sided acrylic foam tape

Product description

tesa® ACXplus 70200 is a deep black double-sided acrylic foam tape. It consists of a high performance acrylic system and is identified by its bonding power, stress dissipation and temperature resistance.
Due to the product’s unique formulation, this double-sided acrylic foam tape combines a very good temperature resistance with an outstanding cold shock resistance up to -40°C. The viscoelastic core of this product is able to compensate for thermal elongations of bonded parts.
tesa® ACXplus 70200 is especially designed for demanding outdoor bonding applications and acts as primary bonding system for different Building Envelope components. It is designed to resist wind loads, temperature changes leading to thermal expansion, and continuous transfer of the forces to the substructure over many years. This product can outperform conventional fastening methods by optimizing our customers’ production processes and the quality and aesthetics of their products.

Main applications

The tesa® ACXplus product family is suitable for a wide range of constructive bonding applications. To ensure the highest performance possible, our aim is to fully understand the application (including the substrates involved) in order to provide the right product recommendation. Example applications include but are not limited to:

  • Wall cladding
  • Structural glazing
  • Various building envelope applications

Technical properties

Elongation at break

1000 %

Type of adhesive

pure acrylic

Total thickness

2000 µm

Backing material

foamed acrylic



Adhesion properties

Adhesion to Steel (initial)

16 N/cm

Adhesion to Aluminium (after 3 days)

32 N/cm

Adhesion to Steel (after 3 days)

40 N/cm

Adhesion to Glass (after 3 days)

40 N/cm

Adhesion to Glass (initial)

24 N/cm

Adhesion to Aluminium (initial)

14 N/cm

Rating properties

Static shear resistance at 23°C




Resistance to chemicals


Humidity resistance




Static shear resistance at 70°C


Ageing resistance (UV)


Temperature resistance long term

120 °C

Temperature resistance short term

220 °C

Softener resistance


Additional Info

Please note that we recommend using tesa® Adhesion Promoter as a surface pre-treatment. It leads to a significant improvement in adhesion levels, avoids moisture infiltration, and promotes long-term resistance against harsh environmental factors. Which tesa® Adhesion Promoter should be used depends on the substrates and the application. We will be glad to advise you in order to find the right solution.

Liner versions:
  • PV24: Blue film liner - unbranded
  • Further liner versions might be available upon request.

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.