PDF – 38 kB
tesa® 6937 Laser-Label
Product descriptiontesa® 6937 is a double layer, brittle acrylic film with watermark. Customized and fraud-resistant information, such as company logo, is permanently embossed in the backing. Marking and cutting are achieved by laser in one step, which makes it possible to realize any desirable label variation and format using only one material. The backing is highly resistant against chemicals, abrasion, temperature and ageing. The adhesive system consists of a resin modified acrylic suitable even for low energy surfaces.
This high performance product is used as a tamper evident identification label over the entire lifetime of a product and also as a data carrier system for intelligent in-process steering.
Available in: black or silver
- Customized Watermark embossed in the backing
- High contrast and excellent marking precision
- Very resistant to heat, abrasion and chemicals
- Tamper Evident: Manipulation leaves visible trace
- Not removeable without destruction of the label
- Flexible formatting and label design: marking and cutting by the laser
- Efficient: Replaces a multitude of pre-made labels
- Just-in-time production reduces storage needs
Type of adhesive
Type of liner
Peel off force from liner
Weight of liner
CO2, Nd:YAG, Yb:YAG
Resistance to chemicals
Ageing resistance (UV)
Temperature resistance long term
23°C, 50% RH, stored in original box
Temperature resistance short term
Additional InfoDimensions: Customer specific
Standard Width: 100mm or 120mm. Length: 170-300m
(Length 6937 PV6: max. 200m)
Assortment and Technical Data:
6937 PV3 black/ white glossy: Adhesive 25g/m², Thickness 95μm without Liner. Color code: 04
6937 PV3 black/ white matt: Adhesive 25g/m², Thickness 100μm without Liner. Color code: 28
6937 PV3 silver/ black glossy: Adhesive 25g/m², Thickness 115μm without Liner. Color code: 35
6937 PV6 black/ white glossy: Adhesive 35g/m², Thickness 145μm without Liner. Color code: 04
6937 PV6 black/ white matt: Adhesive 35g/m², Thickness 145μm without Liner. Color code: 28
To fulfill our customers’ requirements for different applications and substrates the tesa® 6937 series is available in different product variants. Our aim is to fully understand your application in order to provide the right product recommendation. Our
technical support is available upon request.
Optional: UV-Footprint adhesive (MU49):
tesa® 6937 MU49 is equipped with a special acrylic adhesive system, which leaves an UV-detectable trace (“UV-Footprint”). This special variant is available upon request.
Optional: LSE adhesive with UV-Footprint (MU56):
tesa® 6937 MU56 is equipped with a special acrylic adhesive system improved for rough and low surface energy (LSE) surfaces, which leaves an UV-detectable trace (“UV-Footprint”). This special variant is available upon request.
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.