PDF – 35.6 kB
tesa® 6910 Laser-Label
Color-Change marking
Product description
tesa® 6910 is a high-performance polyolefin laser-film. Marking and cutting are achieved by laser in one step, which makes it possible to realize any desirable label variation and format using only one material. The backing is resistant against chemicals, abrasion, temperature and ageing. The adhesive system consists of a resin modified acrylic, suitable even for low energy surfaces.This high performance product is used as a data carrier for intelligent process steering and as an identification label. Marking is achieved by laser-activated color pigments embedded in the backing. The use of a high-speed laser enables a considerably quick marking speed up to 4000mm/ sec.
Available in white color.
Main applications
- Precise and resistant marking
- Very resistant to heat, abrasion and chemicals
- Flexible formatting and label design: marking and cutting by the laser
- Efficient: replaces a multitude of pre-made labels
- Just-in-time production reduces storage needs
Technical properties
Thickness of tape
100 µm
Adhesive weight
25 g/m²
Adhesion to Steel >
4 N/cm
Type of adhesive
acrylic
Type of liner
coated paper
Shelf life time
24 months
Peel off force from liner
0.5-10 cN/cm
Weight of liner
120 g/m²
Tamper Evidence
No
Backing material
polyolefin
Rating properties
Printability
++
Suitable Laser
Nd:YAG
Resistance to chemicals
+
Humidity resistance
++
Ageing resistance (UV)
+
Temperature resistance long term
100 °C
Storage conditions
23°C, 50% RH, stored in original box
Temperature resistance short term
120 °C
Frost resistance
-20 °C
Additional Info
Standard Dimensions:Width: 100mm and 120mm, length: 300m
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Related products
tesa® 4917
tesa® 4965 Original
tesa® 6925 Temperature-Resistant Label Stock
tesa® 6931 Laser-Label
tesa® 6937 Laser-Label
tesa® ACXplus 7074 High Resistance
tesa® 54338
tesa® 54339 Low VOC
tesa® 54994 PV0
tesa® 60608 PV1
tesa® 60428
tesa® 6957 Laser-Label
tesa® 54335 Exterior Performance Sealer
tesa® 4918
tesa® 88103