66013 [Master PI]
[Master PI]
PDF – 63.9 kB
Product description
tesa® 66013 is a conformable, water-based acrylic adhesive tape with a thickness of 130 µm, reinforced by a PET scrim. This tape has especially been developed for all kinds of demanding lamination and mounting applications. Due to its low VOC property it is particularly designed to meet automotive interior requirements.
tesa® 66013 is suitable for laminating all kinds of foam, fleece, and felt substrates and mounting light interior components.
This product is also available in 75 µm(tesa® 66007) and 220 µm (tesa® 66022).
Main features:
- Highly conformable to follow difficult 3-D shapes
- Low VOC (acc. GB 27630) – no critical substances detectable
- Reinforcement supports converting efficiency
- Very low total VOC values
- High initial tack and peel adhesion
- Excellent initial adhesion to a wide variety of interior substrates
- Secure mounting even to nonpolar plastics (PP) and composites (recycled materials)
Main applications
tesa® 66013 is suitable for various types of mounting and lamination applications.
Example applications are:
- Mounting of light interior trims (plastics, LSE surfaces)
- FPC (flexible printed circuits) mounting
- Lamination of insulation materials
- Laminates for NVH (noise, vibration, and harshness) and BSR (buzz, squeak, and rattle) prevention
- Lamination of decorative fabrics
- Lamination of foam for HVAC (heating, ventilation, and air conditioning) seals
- Mounting of flooring systems
To ensure the highest performance possible, our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation.
Technical properties
Backing material
none
Color
transparent
Total thickness
130 µm
Thickness of tape
130 µm
Type of adhesive
water-based acrylic
Type of liner
glassine
Colour of liner
brown/blue logo
Temperature resistance from
-40 °C
Temperature resistance up to
180 °C
Adhesion properties
Adhesion to ABS (after 3 days)
14.5 N/cm
Adhesion to ABS (initial)
14.5 N/cm
Adhesion to PC (after 3 days)
15.1 N/cm
Adhesion to PC (initial)
14.5 N/cm
Adhesion to PE (after 3 days)
7.2 N/cm
Adhesion to PE (initial)
5.9 N/cm
Adhesion to PET (after 3 days)
15.3 N/cm
Adhesion to PET (initial)
13.9 N/cm
Adhesion to PP (after 3 days)
12 N/cm
Adhesion to PP (initial)
8 N/cm
Adhesion to PS (after 3 days)
14.9 N/cm
Adhesion to PS (initial)
14.6 N/cm
Adhesion to PVC (after 3 days)
14.3 N/cm
Adhesion to PVC (initial)
12 N/cm
Adhesion to Steel (after 3 days)
16.5 N/cm
Adhesion to Steel (initial)
15.4 N/cm
Rating properties
Suitable for die cutting
yes
Suitable for rough surfaces
++
Tack
++
Storage conditions
23°C, 50% RH, stored in original box
Conformability
++
Low VOC
++
Fogging
++
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
