63612PV20W

tesa® 63612

1200 µm double sided PE foam tape

  • High ultimate adhesion level for a reliable bonding performance
  • Fully outdoor suitable: UV, water and ageing resistant
  • Conformable PE foam core with high inner strength
  • Suitable for automatic and manual module assembly
  • Easy solar module assembly due to a high foam compression rate
  • It consists of a highly conformable PE foam backing and a tackified acrylic adhesive.

Product description

tesa® 63612 is a double sided PE foam tape for mounting applications.

Application Fields

  • General mounting applications
  • Mounting of trims and profiles
  • Solar frame modules

Product Construction

Elongation at break 190 %
Type of adhesive tackified acrylic
Tensile strength 12 N/cm
Total thickness 1200 µm
Backing material PE foam
Color black/white

Properties / Performance Values

Static shear resistance at 23°C good
Humidity resistance very good
Tack good
Ageing resistance (UV) very good
Static shear resistance at 40°C good
Temperature resistance long term 80 °C
Softener resistance medium
Temperature resistance short term 80 °C

Adhesion to Values

Adhesion to Steel (initial) 12 N/cm
Adhesion to PE (initial) 0.9 N/cm
Adhesion to PC (after 14 days) 12 N/cm
Adhesion to PS (after 14 days) 12 N/cm
Adhesion to Steel (initial) 12 N/cm
Adhesion to ABS (initial) 8 N/cm
Adhesion to ABS (after 14 days) 12 N/cm
Adhesion to PP (after 14 days) 1.5 N/cm
Adhesion to PET (after 14 days) 12 N/cm
Adhesion to Aluminium (after 14 days) 12 N/cm
Adhesion to PC (initial) 8 N/cm
Adhesion to PVC (initial) 6 N/cm
Adhesion to PE (after 14 days) 1.5 N/cm
Adhesion to PS (initial) 8 N/cm
Adhesion to PET (initial) 8 N/cm
Adhesion to Aluminium (initial) 8 N/cm
Adhesion to PP (initial) 0.9 N/cm
Adhesion to Steel (after 14 days) 12 N/cm
Adhesion to PVC (after 14 days) 12 N/cm

Additional Info

Liner variants:
  • PV20 brown glassine paper /blue tesa logo
  • PV50 transparent PET film
  • PV15 blue PE film

Peel Adhesion:
  • immediately: foam splitting on steel
  • after 14 days: foam splitting on steel, ABS, Aluminium, PC, PET, PS, PVC

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products