tesamoll® STANDARD Door-to-floor Brush

tesamoll^® STANDARD Door-to-floor Brush is a highly effective self-adhesive draught excluder brush. It keeps cold air out and is able to seal gaps up to 12 mm.

Suitable for smooth floor surfaces like parquet and wooden floors, PVC, laminate
For gaps of up to 12mm
Easy self-adhesive fitting without screws or nails

Order no:

Colors:

Dimensions: 1 m : 37 mm

Main features

Suitable for smooth floor surfaces like parquet and wooden floors, PVC, laminate
For gaps of up to 12mm
Easy self-adhesive fitting without screws or nails
Durability: 4 years
UV-resistant
Abrasion-resistant
Long-lasting and durable
Material: plastic

Product description

Especially during the cold season, it is important to keep valuable heat inside and prevent any drafts. With the self-adhesive tesamoll^® STANDARD Door-to-floor Brush, you can effectively seal the gap between the door leaf and the floor without the need to drill holes and tighten screws. This plastic door seal is available in various colors. It can be cut to exactly match the door leaf. Equipped with an abrasion-resistant Nylon brush it serves as a door gasket to effectively seals door-to-floor gaps up to 12 mm.

How to seal a gap under the door

The tesamoll^® STANDARD Door-to-floor Brush was made for rooms equipped with even floors made of materials such as parquet, laminate or PVC. It seals the gap between door leaf and floor and is able to cover spaces up to 12 mm. It is an effective draught excluder brush that will also prevent any dust from entering the room.

How to protect living rooms from cold

Insulating your entrance door is the key to a home free from cold draughts. The tesamoll^® STANDARD Door-to-floor Brush is made from UV resistant plastic and can therefore be used also for the entrance door of your house or apartment. It is equipped with an abrasion-resistant brush featuring dense nylon bristles. You can expect this door draught stopper to last for at least 4 years even with doors that are used frequently.

Self-adhesive door sealing for DIY mounting

The tesamoll^® STANDARD Door-to-floor Brush features a solid plastic door mounting plate available in different colors. Thanks to an integrated self-adhesive strip, mounting the tesamoll^® STANDARD Door-to-floor Brush is fast and easy. You only need to clean the surface with alcohol or any household detergent, cut the door-to-floor seal to match the width of the door leaf, firmly press it gasket against the lower end of the door leaf and enjoy a comfortably warm room without any annoying draughts.

No cold draught means lower energy costs

By preventing cold air from entering the room the tesamoll^® STANDARD Door-to-floor Brush results in lower energy consumption, since your heating system will not need to work extra hard to maintain a comfortable room temperature. This not only contributes to a comfortably warm home. It also helps to reduce your heating bill.

Your cookie settings for tesa.com