Share this page
More privacy
Currently no data is transferred to social networks. This happens first when you click on the referring icon. Then a pop-up window opens. Only then, and not before, a data connection will be built up.
tesamoll® STANDARD Door-to-floor Brush is a highly effective self-adhesive draught excluder brush. It keeps cold air out and is able to seal gaps up to 12 mm.
Especially during the cold season, it is important to keep valuable heat inside and prevent any drafts. With the self-adhesive tesamoll® STANDARD Door-to-floor Brush, you can effectively seal the gap between the door leaf and the floor without the need to drill holes and tighten screws. This plastic door seal is available in various colors. It can be cut to exactly match the door leaf. Equipped with an abrasion-resistant Nylon brush it serves as a door gasket to effectively seals door-to-floor gaps up to 12 mm.
tesamoll® door-to-floor brushes come in four qualities offering a wide variety of characteristics:
To match a wide variety of applications, tesamoll® door-to-floor brushes come in 4 different versions:
- For gaps up to 12 mm and even floors, use tesamoll® STANDARD door-to-floor brushes.
- For gaps up to 15 mm and uneven floors, use tesamoll® ALU COMFORT door-to-floor brushes. In combination with carpets, use tesamoll® door-to-floor brushes for Textiles.
- For gaps up to 22 mm use the tesamoll® door-to-floor double roll as a non-adhesive solution. The double roll is not suitable for front doors, since it is not made of weather-resistant material. Exposing it to moisture or freezing temperatures will damage the material.
The tesamoll® door-to-floor brushes should not be positioned at the outside of entrance doors. The materials used for these products do not offer sufficient weather resistance.
The rail of the tesamoll® ALU COMFORT door-to-floor brush is made of aluminum. All other brushes feature a rail made of plastics. The brushes of all tesamoll® door-to-floor brushes are made of Nylon bristles.
The tesamoll® door-to-floor double-roll is made of LDPE foam linked with a Polyethylene foam. It is equipped with a textile covering made of Polyester.
tesamoll® door-to-floor brushes are designed for long-time usage and equipped with an adhesive coating that guarantees excellent adhesion during everyday use. For this reason, the brushes usually cannot be removed without leaving traces. This should be taken into consideration before attaching these brushes to delicate surfaces, such as lacquered or glazed door leafs.
tesamoll® door-to-floor brushes will stick onto just about any flat surface. However, the surface should be free from grease, dust and dirt to guarantee long-time adhesion.
Please note that the tesamoll® door-to-floor brushes are equipped with an adhesive coating that guarantees long-time adhesion. For this reason, the brushes usually cannot be removed without leaving traces. This should be taken into consideration before attaching these brushes to delicate surfaces, such as lacquered or glazed doors.