tesa® DRAAD shower grab bar, self-adhesive, chromed metal
It’s simple to put up the self-adhesive tesa® Draad shower grab bar without drilling. There’s no damage to walls or tiles. The bar has an attractive rounded design. It can be swiftly removed at any time, without a trace left behind. Reuse is also easy, only requiring a new adapter BK164-2.
- Bath grab bar with tesa® Power.Kit fastening technology
- Stainless steel, chromed, guaranteed rustproof, round wall plates
- Secure hold and very high strength – withstands a load of up to 130 kg (tested to ISO17966:2016)
Product description
Product description
The rounded tesa® Draad grab bar is solidly mounted with an adhesive solution that takes 24 hours to set. Not only can you fully rely on it, but you can also enjoy its appealingly rounded design. Since drilling is not involved, there is no damage to your surfaces. The grip can be swiftly removed at your convenience, without a trace left behind. You can also conveniently put it up in a different location with a new adapter BK164-2. Cleaning instruction: The mounting surface must be dust-,grease-, lime-free, and dry. After thorough cleaning, clean the surface with rubbing alcohol. Cleaning agents containing silicone are not suitable for cleaning. Product information: The product must not be exposed to water on a regular basis (no direct water jet or water running down a wall). Suitable for dry areas with occasional splashing water only. The grab bar can be loaded with a maximum of 130kg. It is not suitable for use as a climbing assistance for getting up.
tesa.Power.Kit Glue: Warning! Hazardous respirable dust may be formed when used. Do not breathe dust.
- Bath grab bar with tesa® Power.Kit fastening technology
- Stainless steel, chromed, guaranteed rustproof, round wall plates
- Secure hold and very high strength – withstands a load of up to 130 kg (tested to ISO17966:2016)
- Removable, no damage to the surface, reusable with the fastening adapter BK 164-2
- Easy and clean fitting without drilling
- Suitable for even, glazed tiles with only occasional splash water – splash-proof according to IPX4
- Not suitable for fitting under water and surfaces other than glazed tiles
- Dimensions: 60 mm x 317 mm x 75 mm
- The product life span is 5 years when used properly
Manufacturer Information:
tesa SE
Hugo-Kirchberg-Straße 1
D-22848 Norderstedt
www.tesa.com/service
support@tesa.com