tesa® Adhesive Screw Rectangular for Brick & Stone 5kg

The tesa^® Adhesive Screw Rectangular for Brick & Stone with patented nie wieder bohren. Technology is designed to give a secure hold on rough and solid surfaces like brickwork and stone. Each screw can support 5 kg and using multiple screws increases the holding power. Their slim form allows them to remain concealed behind even narrow objects like cable hooks or shelf brackets. They’re simple to mount and there are no additional tools required.

How to apply – Step by step

1. Use a brush to get rid of as much grit or dust as you can from the surface to ansure an optimal bond.
2. Peel off the protective foil from the adhesive foam tape and lightly press the Adhesive Screw to the surface. The foam tape is only used to keep the screw in place while you administer the adhesive. Make sure the screw body is aligned so that the Adhesive Screw will be hidden behind your object.
3. Pierce the nozzle on the tube of adhesive and pop the key over the other end.
4. Squeeze the adhesive into the bigger hole in the screw body by giving the key a twist. Continue until the adhesive comes out of the smaller hole. Allow 12 hours for the adhesive to dry before you put weight on it.

Wall-mount just about anything on rough surfaces without a drill

It’s always been a kind of a challenge to get screws into surfaces like brickwork and stone. You had to buy or borrow a drill – and specialised masonry drill bits – and make a lot of noise and mess. With a tesa^® Adhesive Screw Rectangular for Brick & Stone 5 kg you can mount anything up to 5 kg per screw – or 10 kg using two of them – inside or outside without the need for any additional tools. Thanks to their slim shape, these screws can be hidden even behind very narrow objects and won’t be seen once the object is on the wall.

Super simple to use – even easier to remove

To remove the screw, get a firm hold on it with a wrench and gently and slowly twist it until the screws comes loose, then pull it away from the wall. Residue can be removed with a glass scraper or a metal brush. Please be aware that tesa^® Adhesive Screws are removable from solid surfaces. If used on sensitive surfaces like plaster, the surface may be damaged.

Please use the Product Finder if you want to mount objects on other surfaces like glass, wallpaper, plaster or tiles and browse our other tesa^® Smart Mounting Solutions.
Not suitable for any non-stick materials.