tesa® Adhesive Screw Rectangular for Brick & Stone 2.5kg

The tesa^® Adhesive Screw Rectangular for Brick & Stone with patented nie wieder bohren. Technology is designed to support up to 2.5 kg per screw on rough and solid surfaces like brickwork and stone. You can use multiple screws to increase the holding power. Their slim form allows them to remain concealed behind even narrow objects like cable hooks or shelf brackets. They’re simple to mount and there are no additional tools required

How to apply – Step by step

1. Use a brush to get rid of as much grit or dust as you can from the surface to secure an optimal bond.
2. Peel off the protective foil from the adhesive foam tape and lightly press the adhesive screw to the surface. The foam tape is only used to keep the screw in place while you apply the adhesive. Make sure the screw head is aligned so that the body of the Adhesive Screw will be hidden behind your object.
3. Pierce the nozzle on the tube of adhesive and pop the key over the other end.
4. Squeeze the adhesive into the bigger hole in the screw body by giving the key a twist. Continue until the adhesive begins to come out of the smaller hole and the cavity is filled evenly. Allow 12 hours for the adhesive to dry before you put weight on it.

Wall-mount just about anything on rough surfaces without a drill

It’s always been a kind of a challenge to get screws into surfaces like brickwork and stone. You had to buy or borrow a drill - and specialised masonry drill bits – and make a lot of noise and mess. With a tesa^® Adhesive Screw Rectangular for Brick & Stone 2.5 kg, you can mount anything up to 2.5 kg per screw – or 5 kg using two of them – inside or outside without the need for any additional tools. Thanks to their slim shape, these screws can be hidden even behind very narrow objects and won’t be seen once the object is on the wall

Super simple to use – even easier to remove

To remove the screw, get a firm hold on it with a wrench and gently and slowly twist it until the screw becomes loose, then simply remove it from the wall. Residue can be removed with a glass scraper or a metal brush. Please be aware that the tesa^® Adhesive Screws are removable from solid surfaces. If used on sensitive surfaces like plaster, the surface may be damaged.

Please use the Product Finder if you want to mount objects on other surfaces like glass, wallpaper, plaster or tiles and browse our other tesa^® Smart Mounting Solutions.
Not suitable for any non-stick materials.