The smart way to mount or hang objects on smooth and solid surfaces.
Click through the tabs in this step-by-step video to see how quick and easy it is to get your projects – and your possessions – off the ground.
Our Adhesive Nails are quick and simple to use. No hammering or sore thumbs, and no holes left behind when you remove them, either. Before you get mounting things, though, please have a look through our step-by-step guide. Not suitable for wallpaper, plaster, copper, brass, marble, coated paper or non-stick and porous materials.
Clean the surface you want to attach the nail to with a dust-free cloth and a little rubbing alcohol or methylated spirit to remove any dirt or grease. (Steer clear of detergents that contain silicone, though, as this can interfere with the nail’s adhesion). Make sure your surface is dry before mounting your Adhesive Nail.
Remove the Adhesive Strip using the handle and without touching the adhesive area itself, carefully apply the strip vertically to the surface.
Press down firmly across the entire surface for 5 seconds to activate the Powerstrips® Technology.
First peel away the protective foil. Then align the nail with the top edge of the strip – ensuring that the head of the nail is at the top – and fold the nail down onto the adhesive area immediately above the red line.
All that’s left to do is press down firmly again with both thumbs at the top of the nail for 5 seconds and for another 5 seconds at the bottom.
The Adhesive Nail 4kg is ideally suited to hanging notice boards, and you can use two of them to hang up to 8kg – but why stop there? Suddenly everything’s going to look like it needs hanging: that spice rack, that picture, that saucepan rack…
To remove an Adhesive Nail, take the head of the nail between thumb and forefinger and with your other hand take hold of the exposed tab. Without pressing the nail onto the surface, gently stretch the Adhesive Strip parallel to the wall and NOT away from it, releasing the tiny polymer bonds that make up the adhesive surface.