Self-Adhesive Polyester Film Labels

Product description

The labels consist of a white, inscribable PET-film and a double-sided adhesive tape with extremely high adhesive strength.

The labels are applied to permanently mark components and parts with rough casting surfaces. A secure adhesion is also achieved on lightly polluted substrates and low energy surfaces. Available Colors: White

Application Fields

  • Very good moisture resistance
  • Good aging and weathering resistance
  • Good solvent resistance
  • Good mechanical resistance
  • Secure permanent adhesion
  • Printable by Thermotransferprint
  • Fast, easy, and secure application
  • Very high tack

Product Construction

Type of adhesive tackified acrylic
Total thickness 9.84 mils
250 µm
Backing material PE foam
Color black

Properties / Performance Values

Elongation at break 220 %
Static shear resistance at 23°C good
Humidity resistance good
Tensile strength 6.11 lbs/in
10.7 N/cm
Ageing resistance (UV) good
Static shear resistance at 40°C good
Temperature resistance long term 158 °F
70 °C
Temperature resistance short term 194 °F
90 °C

Adhesion to Values

Adhesion to Steel (initial) 94.1 oz/in
10.3 N/cm
Adhesion to PE (initial) 50.25 oz/in
5.5 N/cm
Adhesion to PC (after 14 days) 140.7 oz/in
15.4 N/cm
Adhesion to PMMA (after 14 days) 148.92 oz/in
16.3 N/cm
Adhesion to ABS (initial) 82.23 oz/in
9 N/cm
Adhesion to ABS (after 14 days) 100.5 oz/in
11 N/cm
Adhesion to Aluminium (after 14 days) 109.63 oz/in
12 N/cm
Adhesion to PC (initial) 112.38 oz/in
12.3 N/cm
Adhesion to Glass (after 14 days) 124.25 oz/in
13.6 N/cm
Adhesion to PE (after 14 days) 56.64 oz/in
6.2 N/cm
Adhesion to Glass (initial) 116.94 oz/in
12.8 N/cm
Adhesion to PMMA (initial) 116.94 oz/in
12.8 N/cm
Adhesion to Aluminium (initial) 80.4 oz/in
8.8 N/cm
Adhesion to Steel (after 14 days) 130.65 oz/in
14.3 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.