tesa® 62957 Cold Temperature Tape
Double-sided PE foam tape
Product description
tesa® 62957/62958 is a double-sided tape consisting of a PE foam backing and an acrylic adhesive.
tesa® 62957 features especially:
tesa® 62957 is tested according to IFT MO-01/1 : 2007/1; Report No.: 105 42202
tesa® 62957 features especially:
- Cold processable: Tape application up to -10°C feasible (surface has to be dry and clean)
- Conformable foam backing to compensate design tolerances or uneven surfaces
- UV, water and aging resistance
tesa® 62957 is tested according to IFT MO-01/1 : 2007/1; Report No.: 105 42202
- Category 4.3 Temperature Cycle Test
- Category 4.4 UV and Humidity Resistance
Application Fields
- Permanent mounting of window skirting trims
Product Construction
| Backing material | PE foam |
| Type of adhesive | acrylic |
| Total thickness | 1000 µm |
| Color | white |
Properties / Performance Values
| Elongation at break | 180 % |
| Tensile strength | 10 N/cm |
| Ageing resistance (UV) | very good |
| Static shear resistance at 40°C | medium |
| Tack | very good |
| Temperature resistance long term | 60 °C |
| Temperature resistance short term | 80 °C |
Adhesion to Values
| Adhesion to Aluminium (initial) | 4 N/cm |
| Adhesion to Aluminium (after 14 days) | 13.5 N/cm |
| Adhesion to PVC (initial) | 4 N/cm |
| Adhesion to PVC (after 14 days) | 13.5 N/cm |
| Adhesion to Steel (initial) | 4 N/cm |
| Adhesion to Steel (after 14 days) | 13.5 N/cm |
Additional Info
Liner variants:
PV14 white PE coated paper (120µm)
PV15 blue filmic PE liner (100µm)
Peel Adhesion:
after 14 days: foam splitting on Steel, Aluminium, ABS, PC, PS, PET, PVC
PV 14 shows lower peel adhesion values on the covered side
PV14 white PE coated paper (120µm)
PV15 blue filmic PE liner (100µm)
Peel Adhesion:
after 14 days: foam splitting on Steel, Aluminium, ABS, PC, PS, PET, PVC
PV 14 shows lower peel adhesion values on the covered side
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
