Refrigerator and Freezer – Tape Solutions for Appliance Markets

Refrigerator and freezer coils are attached as closely and tightly as possible to the polystyrene body. Aluminium tape provides the ideal solution to enable the highest rate of temperature transfer.

Bonds the evaporator plate directly to the back of the polystyrene body over the full area (100%) to avoid polystyrene foam migration after injection.

When mounting decorative plastic or metal applications onto the front door, tape offers many advantages, e.g. a clean process.

With double-sided tapes, emblems can be mounted without punching the metal or plastic substrates – ideal when pre-assembled.

Applying displays already equipped with double-sided tape is efficient and clean.

Many small parts made of plastic or metal have to be mounted to the PS body. Their handling and positioning becomes easier if they are already equipped with double-sided tape.

It is necessary to mount the vacuum insulation panel to the housing with double-sided tape to avoid the PU foam getting in between the bonding.

The intelligent and sophisticated way to mount deco glass panels, without screws or the curing time and risk of dripping with glue systems – double-sided tape.

Protect critical glass, plastic or painted metal parts to avoid scratches, dirt or other defects during the assembly, transport or installation processes.

Fixation with tape during transport prevents damage to glass shelves in particular as well as to loose bins and other small parts.

The tape will take on some of the load so that heavy impacts do not have any effect on the door hinges, thereby avoiding damage.

Venting tape covers holes to prevent the PU foam from squeezing out during injection while still allowing air flow.

Covering all gaps and joints prevents the PU foam from squeezing out during injection. Cloth-based tapes fit the contours of small corners best.

Holding the form together tightly where two parts (for example, PS body and metal housing) are joined prevents damage to the PU foam during injection.

Covering holes as well as gaps in a PS body or door prevents the PU foam from squeezing out during injection.