tesa_Softprint_52921_pr_001_fullsize
Product information

tesa® Softprint 52921 FE



Product description

tesa® 52921 Softprint® Fast & Easy is designed specifically for mounting thinner photopolymer plates (best 1,14mm/.045" or 1,7mm/.067") in wide-web flexo printing. The product is proven for usage on steel cylinders and hard PU-sleeves. The optimised design of the product and the special adhesive allow easy mounting, and the re-enforcement with a PET stabilisation film means easy and very good repositioning and good demounting after printing, without leaving residues. The design of the tape enables perfect print results when a combination of line work and screens are to be printed.

Main applications

tesa® 52921 Softprint® Fast & Easy is a 500µm (20 mil) category double-coated foam tape, designed specifically for mounting thinner photopolymer plates of thickness 1,14mm (.045") or 1,70mm (.067") in wide-web film and paper flexographic printing, on machines using mainly sleeves.
tesa_Softprint_52921_pr_001_fullsize
tesa_52921_pr_001_fullsize

tesa_Softprint_52921_pr_001_fullsize

tesa_52921_pr_001_fullsize

Technical properties

Backing material

PE foam

Thickness category

500 µm

Type of adhesive

acrylic

Type of liner

PP

Hardness

medium

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads