tesa® ACXplus 7094 LSE Performer

1,00 µm double-sided acrylic foam tape



Product description

tesa® ACXplus 7094 is a double-sided acrylic foam tape, available in deep black. It consists of a high performance acrylic system and is primarily characterised by its bonding power and stress dissipation characteristics.

Our new LSE performer series features an innovative functional adhesive layer that makes strong bonds to low surface energy substrates (such as critical plastics and powder-coatings) possible without the requirement of a surface pre-treatment (e.g. with adhesion promoter). Furthermore, 709x enables the ability to process tape in unheated production environments with temperatures down to 0° C. Due to the product's unique formulation, this double-sided acrylic foam tape combines very high adhesion levels with the ability to absorb and dissipate high dynamic loads. The viscoelastic core of this product is able to compensate thermal elongation of bonded parts. tesa® ACXplus 7094 performs well on a broad variety of substrates including powder-coated surfaces and critical plastics. Even in combinations of such materials, this product provides advanced safety due to its innovative product design.

Main applications

The tesa® ACXplus product family is suitable for a wide range of constructive bonding applications. To ensure the highest performance possible, our aim is to fully understand the application (including the substrates involved) in order to provide the right product recommendation. Example mounting applications include but are not limited to:

  • Reinforcement bar (also referred to as stiffener bar) mounting (e.g. in elevators)
  • Mounting of critical plastics or low surface energy substrates (LSE surfaces including powder-coatings)
  • Mounting applications in unheated/cold production facilities (depending on the end-product application)

Technical properties

Elongation at break

1500 %

Type of adhesive

specialty

Total thickness

1000 µm

Backing material

foamed acrylic

Colour

deep black

Adhesion properties

Adhesion to ABS (after 3 days)

40 N/cm

Adhesion to PP (after 3 days)

40 N/cm

Adhesion to Aluminium (after 3 days)

40 N/cm

Adhesion to Steel (after 3 days)

40 N/cm

Rating properties

Static shear resistance at 23°C

++

T-block

+

Resistance to chemicals

++

Humidity resistance

++

Tack

++

Static shear resistance at 70°C

+

Ageing resistance (UV)

++

Temperature resistance long term

80 °C

Temperature resistance short term

100 °C

Softener resistance

++

Additional Info

Liner variants:
  • White PE-coated paper liner with tesa® ACXplus branding (PV22)
  • Further liner options are available upon request

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads
Related products