tesa-4914-250micrometer-double-sided-non-woven-tape-049140000900-pr

tesa® 4914 Low VOC

Double-sided non-woven tape with differential adhesive

Product description

tesa® 4914 is a translucent double-sided self-adhesive tape consisting of a non-woven backing and a tackified acrylic adhesive with lower coating weight on the open side.

tesa® 4914 features especially:
  • Open side: lower adhesion level
  • Easier removal while tearing the bond apart from the original surface even after exposure to demanding environmental conditions
  • Covered side: higher adhesion level
  • Foamed adhesive coating with high initial tack
  • Excellent performance on rough surfaces

Application Fields

  • Mounting of car roof linings in car production
  • Lamination of foamed materials in combination with smooth materials on the open side

Product Construction

Type of adhesive tackified acrylic
Type of liner PE
Colour of liner red
Weight of liner 92 g/m²
Total thickness 250 µm
Thickness of liner 80 µm
Backing material non-woven
Colour translucent

Properties / Performance Values

Elongation at break 3 %
Static shear resistance at 23°C low
Static shear resistance low
Chemical resistance good
Humidity resistance good
Tack good
Tensile strength 8 N/cm
Ageing resistance (UV) good
Static shear resistance at 40°C low
Temperature resistance long term duration 80 °C
Softener resistance good
Temperature resistance short term duration 140 °C

Adhesion to Values

Adhesion to PC (covered side, initial) 8.1 N/cm
Adhesion to PET (covered side, after 14 days) 7.9 N/cm
Adhesion to Steel (initial) 7 N/cm
Adhesion to PE (initial) 3.2 N/cm
Adhesion to PC (after 14 days) 7.4 N/cm
Adhesion to PS (after 14 days) 7.4 N/cm
Adhesion to Aluminium (covered side, initial) 7.8 N/cm
Adhesion to PS (covered side, initial) 8.1 N/cm
Adhesion to PE (covered side, after 14 days) 5.3 N/cm
Adhesion to ABS (initial) 5.6 N/cm
Adhesion to ABS (after 14 days) 7.7 N/cm
Adhesion to PP (after 14 days) 4.4 N/cm
Adhesion to PVC (covered side, initial) 7.8 N/cm
Adhesion to PET (after 14 days) 6.2 N/cm
Adhesion to Aluminium (after 14 days) 6.3 N/cm
Adhesion to ABS (covered side, after 14 days) 7.6 N/cm
Adhesion to PP (covered side, initial) 5.6 N/cm
Adhesion to PC (initial) 5.8 N/cm
Adhesion to PVC (initial) 4.8 N/cm
Adhesion to PE (covered side, initial) 4.2 N/cm
Adhesion to Steel (covered side, after 14 days) 9.3 N/cm
Adhesion to PET (covered side, initial) 7.8 N/cm
Adhesion to PE (after 14 days) 3.4 N/cm
Adhesion to PS (initial) 5.8 N/cm
Adhesion to ABS (covered side, initial) 7.6 N/cm
Adhesion to PET (initial) 4.8 N/cm
Adhesion to Alu (covered side, after 14 days) 8 N/cm
Adhesion to PC (covered side, after 14 days) 8.2 N/cm
Adhesion to Aluminium (initial) 5.2 N/cm
Adhesion to PS (covered side, after 14 days) 8.2 N/cm
Adhesion to PVC (covered side, after 14 days) 7.8 N/cm
Adhesion to PP (initial) 4.6 N/cm
Adhesion to Steel (after 14 days) 7.8 N/cm
Adhesion to Steel (covered side, initial) 8.2 N/cm
Adhesion to PVC (after 14 days) 7.7 N/cm
Adhesion to PP (covered side, after 14 days) 6.5 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products