tesa_4063565115554_66743-00001_LI493_left_pa

tesa® PRO 66743 Mounting Wallpaper & Plaster

tesa PRO Mounting Wallpaper & Plaster The double-sided tape is designed to attach objects to textured and sensitive objects, simplifying any craftsman's work. The mounting tape's formula compensates minor surface irregularities in wallpaper and plaster. A single 10-cm strap holds up to 1 kg.

Product description

tesa PRO Mounting Wallpaper & Plaster When clients want you to attach objects to textured surfaces without using nails or screws, use tesa PRO Mounting Wallpaper & Plaster. The double-sided tape is designed to hold onto sensitive surfaces. Its formula compensates minor surface irregularities and simplifies craftsmen's work. Be able to hang up artwork inside of buildings or hang up signs in garages. 1 m strip of tape can hold up to 10 kg. Apply in vertical strips and along the full length of the object. Press down firmly on the mounting tape for at least five seconds on a dust-free surface.

Application Fields

Easy to apply:
  • In order for the mounting tape to develop its full holding power, the object and surface must be free of dust, dirt and grease.
  • Don't touch the open adhesive surface as it could impair the adhesive strength.
  • Affix vertical strips that correspond to the entire length of the object. Reinforce the upper portion with shorter strips.
  • For removal, carefully pull the mounting tape parallel from the wall. As the mounting tapes are intended for permanent use, material residues may remain on the object. Try to remove with tesa adhesive remover.

Product Construction

Backing material PE foam
Type of adhesive synthetic rubber
Colour of liner white with tesa logo
Total thickness 1350 µm
Colour white

Properties / Performance Values

Humidity resistance low
Temperature resistance long term duration 40 °C
Temperature resistance short term duration 40 °C
Tack good
Ageing resistance (UV) good

Adhesion to Values

Adhesion to Steel (initial) 25 N/cm
Adhesion to PE (initial) 22 N/cm
Adhesion to PVC (covered side, initial) 22 N/cm
Adhesion to PE (covered side, initial) 16 N/cm
Adhesion to Aluminium (initial) 23 N/cm
Adhesion to Steel (covered side, initial) 20 N/cm
Adhesion to PC (covered side, initial) 21 N/cm
Adhesion to Aluminium (covered side, initial) 18 N/cm
Adhesion to PS (covered side, initial) 20 N/cm
Adhesion to ABS (after 14 days) 10 N/cm
Adhesion to PP (covered side, initial) 17 N/cm
Adhesion to PC (initial) 22 N/cm
Adhesion to PVC (initial) 25 N/cm
Adhesion to PET (covered side, initial) 25 N/cm
Adhesion to PS (initial) 25 N/cm
Adhesion to PET (initial) 25 N/cm
Adhesion to PP (initial) 23 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products