tesa® 60152 Adhesion Promoter PU/HPVC

Adhesion Promoter for PU



Product description

tesa® 60152 Adhesion Promoter PU/HPVC can be used to improve the adhesion of tesa's pressure-sensitive adhesive tapes to polyurethane and hard polyvinyl chloride substrates. It is especially recommended for our ACXplus product family. The UV-traceability of this adhesion promoter allows easy quality control during the application process.

Main applications


1 tesa® 60152 is a liquid used to improve and promote the adhesion of tesa® tapes
1 It ensures a strong bond of tapes on polyurethane and hard polyvinyl chloride substrates
1 Significant improvement of adhesive strength and peel adhesion
1 tesa® 60152 is especially recommended for the tesa® ACXplus product family

Technical properties

Consistency

liquid

Spreading rate ca.

15 m²/l

Solids

10 %

Density

0.76 g/cm³

Viscosity

9 mPa s

Color

yellow

Additional Info

The bonding surface should be free of dust, grease, oil, moisture and other contaminants before using tesa® Adhesion Promoter 60152. Clean the substrate with a lint free cloth and appropriate solvents, such as Ethanol or Isopropanol. Then apply tesa® Adhesion Promoter 60152 thinly to the bonding surface, making sure that the entire surface is coated. The Adhesion Promoter can be applied with a lint free cloth or brush, application pen or felt applicator. Wait 2 to 5 minutes to give the solvents time to evaporate. Keep the prepared surface free from contaminants prior to applying tesa® ACXplus tape. Open time for bonding are several hours/ days. Shelf life are 12 month when stored in the original container at room temperature. For all further information kindly refer to the respective material safety data sheet (MSDS). http://www.tesa.com/company/safety/msds

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads
Related products