How to use tesa® Mounting Tape for Transparent & Glass 20kg/m.
Using tesa® Mounting Tape for Transparent & Glass 20kg/m

Using tesa® Mounting Tape for Transparent & Glass 20kg/m

Smart mounting on transparent and solid surfaces.



Step-by-step video tutorial

Click through the tabs in this step-by-step video to see how quick and easy it is to get your projects – and your possessions – off the ground.

How to use tesa® Mounting Tape for Transparent & Glass 20kg/m

Invisible, UV resistant and capable of holding 20kg/m, there’s nothing better for permanently mounting pretty much anything you can think of on glass doors and windows. Suitable for glass and acrylic. For other surfaces please use another tesa® Smart Mounting System product.

Steps

Cleaning the surface.
tesa SE
Cleaning the surface.

01

Preparing the surfaces

Use a dust-free cloth and a silicone-free cleaner, rubbing alcohol or methylated spirit to get rid of any dirt or grease that might impair the Mounting Tape’s adhesion. A silicone residue can make surfaces non-stick, so be sure to steer clear of it.

Applying tesa® Mounting Tape for Transparent & Glass 20kg/m.
tesa SE
Applying tesa® Mounting Tape for Transparent & Glass 20kg/m.

02

Applying the Mounting Tape

Cut lengths of Mounting Tape to the required length and apply them vertically to your object rather than the glass you’re mounting it on. This will allow you to place the object precisely where you want it and also to activate the Powerbond® Technology. Since the load will be greater at the top of the hanging area, ensure that there is enough tape in this area.

Activating the Powerbond® Technology
tesa SE
Activating the Powerbond® Technology

03

Activate the Powerbond® Technology

Use your thumbs to press down or rub firmly for at least 5 seconds along the whole length of each section of tape.

Mounting with tesa® Mounting Tape for Transparent & Glass 20kg/m.
tesa SE
Mounting with tesa® Mounting Tape for Transparent & Glass 20kg/m.

04

Mount your object

Now all you need to do is peel off the protective backing, align the plant holder and press it to the surface precisely where you want it. Another 5 seconds’ pressure across the whole of the surface will ensure that the bond is as secure as possible.