Product Construction
| Backing material | slightly-creped paper |
| Total sustainable product content excl. liners | Total sustainable product excl. liners by weight (acc. EN 16785): 54 % |
| Total thickness | 140 µm |
| Type of adhesive | type: natural rubber |
tesa® 4316 PV3
Fine crepe paper masking tape with temeprature resistance of 100°C
Sustainable Aspects
- 54% bio-based content in total product excluding liner (by weight)
- Thin and conformable backing
- Resistant to wet sanding
- Suitable for different paints and fillers
Product description
tesa® 4316 is suitable for various masking purposes and features a temperature resistance up to 100 °C for subsequent oven-drying. The tape is made up of a fine crepe paper backing, which is extremely flexible and conformable, and a natural rubber adhesive system. The adhesive features good adhesive power to various surfaces, as well as challenging surfaces such as painted metal or rubber. It is hand-tearable, easy to remove and allows very good paint anchorage. Also, the tape is resistant to wet sanding. Paints and fillers adhere well to the backing.
Product details and specifications
Product Features
- Thin and conformable backing
- Resistant to wet sanding
- Suitable for different paints and fillers
- Excellent adhesion for holding masks against overspray
Application Fields
Suitable for masking jobs with subsequent oven drying for temperatures up to 100°C.
Sustainable Aspects
- 54% bio-based content in total product excluding liner (by weight)
Product Construction
| Backing material | slightly-creped paper |
| Total sustainable product content excl. liners | Total sustainable product excl. liners by weight (acc. EN 16785): 54 % |
| Total thickness | 140 µm |
| Type of adhesive | type: natural rubber |
Properties / Performance Values
| Easy to remove | yes |
| Temperature resistance (30 min) | 100 °C |
| Elongation at break | 10 % |
| Tensile strength | 38 N/cm |
| Hand tearability | very good |
Properties / Performance Values
| Easy to remove | yes |
| Temperature resistance (30 min) | 100 °C |
| Elongation at break | 10 % |
| Tensile strength | 38 N/cm |
| Hand tearability | very good |
Adhesion to Values
| Adhesion to Steel | 3.4 N/cm |
Adhesion to Values
| Adhesion to Steel | 3.4 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
