TESA_Powerbond_35683aq.jpg

Home Organiser

An organiser helps you get your life in order, and it's easier than you think to make. All you need is a wood panel and a few containers and shelves. And, thanks to tesa® Powerbond, you can be sure they'll all stick together.

Difficulty Level Original & quick
Duration 30

We need:

Poplar plywood board: 70 x 65 x 1.2 cm white paint paint roller undercoat paint white plastic containers (for example, "PLUGGIS" from IKEA) a pen holder small bookends pencil scissors alcohol- or silicone-free glass cleaner tesafilm® desk dispenser Easy Cut Frame tesa® Powerbond ULTRA STRONG tesa Powerbond® INDOOR (1-2 rolls)

How we do it:

DIY Home Organiser / Step 1: Overview
01

Collect all items and let's start!

DIY Home Organiser / Step 2: Paint
02

Paint the wood panels on both sides, using an undercoat as a base layer.

DIY Home Organiser / Step 3: Mark positions
03

Evenly distribute the tools and holders on the panels and slightly mark their positions with a pencil.

DIY Home Organiser / Step 4: Clean and apply
04

Clean the tool holder with alcohol- or silicone-free glass cleaner then apply tesa Powerbond® ULTRA STRONG on the reverse.

DIY Home Organiser / Step 5: Cut
05

Cut to fit.

DIY Home Organiser / Step 6: Press firmly
06

Press firmly for five seconds.

DIY Home Organiser / Step 7: Remove protective films
07

Remove protective films.

DIY Home Organiser / Step 8: Press again
08

Line the tool holder up with its marked area on the board and press firmly for five seconds.

DIY Home Organiser / Step 9: Find position
09

Once the boards are complete, remove any dust from the wall where you're planning to mount them. Place the boards against the wall and mark their desired position with a pencil. The panels should fixed 3 cm apart from one another.

DIY Home Organiser / Step 10: Attach five tesa Powerbond®
10

Alternately attach five tesa Powerbond® ULTRA STRONG strips – in full length and in approx. 20 cm strips – vertically on the wall.

DIY Home Organiser / Step 11: Press firmly
11

Press firmly for five seconds.

DIY Home Organiser / Step 12: Remove protective films
12

Remove protective films.

DIY Home Organiser / Step 13: Press
13

Press the boards on the wall holding for five seconds.

tesa products required for this project