tesa® Powerbond OUTDOOR

tesa® Powerbond OUTDOOR is a double-sided self-adhesive tape suitable for a wide range of outdoor applications.

  • Ideal for exterior use
  • UV-, water- and temperature-resistant
  • Holds up to 1 kg* per 10 cm tape

Order no:
Colors:
Dimensions:


Main features

  • Ideal for exterior use
  • UV-, water- and temperature-resistant
  • Holds up to 1 kg 1 per 10 cm tape
  • Holds on tiles, brick, stone, metal and most plastics

1 For flat objects up to 10 mm thick and on most smooth, sufficiently firm surfaces

Product description

tesa® Powerbond® OUTDOOR is a double-sided tape to fix things like house numbers on solid surfaces, including outdoors. Easy to use and no tools are required except a pair of scissors. A permanent, strong hold that under optimum conditions means a single 10 cm strip of tape can hold up to 1 kg.

Related products

tesa® Powerbond® OUTDOOR is the permanent way to mount objects on solid surfaces both indoors or outside. Resistant to humidity and unaffected by temperatures as low as -10 °C and as high as 80 °C. UV proof. A 10 cm strip of tesa® Powerbond OUTDOOR can under optimum conditions hold up to 1 kg.

How to apply – Step by step

1. Get an optimal bond by using a brush to get rid of dust and grit from your surface.
2. Apply the tesa Powerbond® OUTDOOR to the rougher surface of the two.
3. Apply tesa Powerbond® OUTDOOR in vertical strips along the full length of the object. Apply pressure along the tesa Powerbond® OUTDOOR for at least 5 seconds.
4. Take off the protective foil and without touching the exposed adhesive area, position the object.
5. To get as close a bond as possible, finally press down firmly on the item for at least another 5 seconds.

No need for tools

tesa Powerbond® OUTDOOR has been designed for use on solid surfaces outdoors. No tools required, just a pair of scissors - this humble roll of tape is all you need. Get things like house numbers attached on the wall, permanently and easily. A single 10 cm strip can hold 1 kg under optimal conditions.

How to remove

Since tesa Powerbond® OUTDOOR is for a permanent hold, it shouldn't be removed. If you have to remove it, try to tear it carefully, slowly and parallel to the surface. However, residue may remain on the object or the surface. To remove the residue, use tesa® Adhesive Remover.

For solutions to mount in bathrooms and on glass on tiles, metal, wood, glass and other surfaces, please use the tesa Powerbond® Product Finder.