tesa® Adjustable Adhesive Screw for Tiles & Metal 3kg

Height adjustable adhesive screw for up to 3kg. Perfect for mounting decorative objects and kitchen utensils on smooth and solid surfaces like tiles and metal.

  • For smooth and solid surfaces like tiles indoors
  • For objects up to 3kg per screw or 6kg using 2 screws
  • Height adjustable for straight alignment of objects

Order no:
Colors:
Dimensions: 2 Hooks + 3 Strips


Main features

  • For smooth and solid surfaces like tiles indoors
  • For objects up to 3kg per screw or 6kg using 2 screws
  • Height adjustable for straight alignment of objects
  • Removable without a trace
  • Reusable with a new strip

Product description

tesa® Adjustable Adhesive Screw for Tiles & Metal together with the corresponding Adhesive Strips, included, offer a secure hold on smooth and solid surfaces for up to 3 kg per screw. The innovative height adjustability makes these especially suitable for the vertical alignment of objects, or the use of two Adhesive Nails for one object. Easy and convenient mounting without the surface damage and hassle associated with a hammer or drill. Thanks to the patented Powerstrips® Technology, the Adhesive Nail is tracelessly removable and reusable with a new tesa® Adhesive Strip.

Related products

A tesa® Adhesive Screw for Tiles & Metal 3 kg combined with the included Adhesive Strips represent a simple, secure and damage free way to hang kitchen utensils or other small decorative items on surfaces like tiles, metal, veneer and glass where drills or hammers would cause damage. Each Adhesive Screw can support up to 3 kg, and using two screws can double the holding power.

How to apply – Step by step

1. To ensure the best possible bond, clean the surface with a silicone-freewindow cleaner or methylated spirit. The surface should be completely dry before application.
2. The Adhesive Strip should be applied to the rougher surface.
3. Press down evenly over the entire strip for at least 5 seconds and only then remove the protective foil. Be careful not to touch the exposed adhesive area at any time.
4. Now apply your tesa® Adhesive Screw by aligning it with the top edge of the strip and then folding it down. Press down evenly on the entire screw for at least 5 seconds.
5. The tab should be left accessible behind your object or beneath the screw for easy removal.

The tesa® Adhesive Screw for Tiles & Metal is made for use on surfaces like tiles, metal, veneer and glass – surfaces where drilling or using a hammer is very likely to result in cracks, chips or breakages of the surface. That’s not the case with this Adhesive Screw for tiles – there’s no need for tools. All you need to hang your object is inside the pack. Adhesive Screws provide you with the ideal way to hang pictures and other small decorative items.

Simple to attach, even easier to remove

Hanging your object using a tesa® Adhesive Screw for Tiles & Metal takes a matter of minutes. When you want to move your object or change it for something new, it's easy. Just grab the exposed tab and stretch the strip down up to 35cm, slowly and parallel to the wall, to release the thousands of tiny bonds that make up the adhesive surface. Make sure not to press the Adhesive Screw or your object against the wall while doing this as this may prevent the strip from stretching and cause it to tear.

Use again

This Adhesive Screw can be used more than once, so it fits in well with an environmentally aware lifestyle. Just get a refill pack of tesa® Adhesive Strips for Tiles & Metal from your tesa® Smart Mounting System retailer to reuse your Adhesive Screw again and again.

For solutions to mounting on glass, plaster, wallpaper, brick and other surfaces, please use the Product Finder and refer to our other tesa® Smart Mounting Solutions.
Not suitable for any non-stick materials.