Unpack the tesa Powerstrips®

Remove the first protective foil. Leave the second one on the tesa Powerstrips®.

Firmly press down the tesa Powerstrips® on the cleaned surface for at least five seconds. Then remove the second protective foil from the tesa Powerstrips®.

Place the object to be mounted on the red line so that the grip tab can be used later. Now press firmly for at least five seconds. Note the weight of the object. tesa Powerstrips® Large can support weights of up to 1.5 kg. tesa Powerstrips® Small can support weights of up to 0.75 kg.

To remove, simply pull off the tesa Powerstrip® parallel to the wall. Finished!

tesa Powerstrips® The solution for 1001 applications

Unpack the tesa Powerstrip®.

Remove the protective paper.

Press the tesa Powerstrip® on the surface.

Remove the protective foil.

Detach the base plate from the hook.

Now mount the base plate to the Powerstrip®.

Now press firmly for at least five seconds.

Finally, simply slide the Powerstrips Hook Large onto the base plate.

Hang up a towel.

Fertig.

To remove the hook, slide it upwards and take it off.

Turn the hook around, slide and notch into the base plate.

Pull the grip tab on the tesa Powerstrip® downwards parallel to the wall

That's it. Removable without a trace thanks to tesa Powerstrips® technology

Unpack the tesa Powerstrip®

Pull off the protective foil on one side

Now press firmly for at least five seconds.

Pull off the second protective foil

Now open the hook

Place the hook above the red line

Press firmly

Now close the hook

Finished! Now it's ready to hang up towels.

To remove simply open the hook

Hold the hook lightly without pressing it. Now pull the Powerstrip® downwards parallel to the wall.

Finished! Leaves no damage or residue